PTSFab

PTSFab Performance speed shop specializing in Turbo System Fabrication. PTSFab specializes in performance and race fabrication.

From mild to wild, and everything in between, we can build it. Turbo systems, headers, chassis fabrication, suspension, what ever your project requires, the PTSFab crew can make it a reality. With over 30 years of in field experience and knowledge welding and fabricating with every type of materials, stainless, mild, aluminum, titanium, brass, we have the ability to make what ever you need.

Our Elmer Racing collectors have finally arrived from the boys over at Modern Racing! It’s time to burn some pipe! stain...
01/16/2025

Our Elmer Racing collectors have finally arrived from the boys over at Modern Racing! It’s time to burn some pipe! stainless_bros, ticonindustries, and racepartsolutions always on board for our turbo kits.

The new year is here, and we are excited to officially release our 88-98 OBS Silverado weld in K members!!!!! We are gea...
01/02/2025

The new year is here, and we are excited to officially release our 88-98 OBS Silverado weld in K members!!!!!

We are geared up and beginning the production of the first round of 20, we are going to give these at a lower introductory price to get these things rollin!

If you’re ready to take your truck to the next level and need not only extra room but removing unnecessary weight, these k members are the ticket!

This allows full access to oil pan for removal, allows much more room around the engine, and ditches the extremely heavy steering gear. They are set up for a narrowed pinto rack which we offer with or without the k member.

Total weight savings with the K member and steering is a whopping 66lbs off the front!

If you’re ready to pull the trigger, hop on over to our site and be one of the first 20 and get a little extra savings!

https://ptsfab.shop/collections/chassis-components-1/products/obs-chevy-silverado-weld-in-tubular-k-member-88-98

Black Friday sale starts now!!!! Be sure to get with us if you have any questions on anything, entire site is 10% off, k...
11/16/2024

Black Friday sale starts now!!!! Be sure to get with us if you have any questions on anything, entire site is 10% off, k members are free shipping!

Bullseye gt55 88mm (class legal) Exile modular gt60 compressor cover Billet back plate111mm turbine wheel Polished Bulls...
07/29/2024

Bullseye gt55 88mm (class legal)
Exile modular gt60 compressor cover
Billet back plate
111mm turbine wheel
Polished Bullseye V band turbine housing 1.40 AR

Been 4.30’s with a small block ford on M1 at 2800lbs, 40lbs of boost. Roughly 30 passes since refresh. No wheel damage, never smoked.

2200$ obo shipped anywhere in the US

First time taking a turbo car and making it a blower car….. but that 18-71 makes it feel less guilty. Got the driver all...
07/14/2024

First time taking a turbo car and making it a blower car….. but that 18-71 makes it feel less guilty. Got the driver all fitted and we are on to the last pieces before this thing heads to wiring and plumbing.

Commence zoomies!

Dustin whipped up this rotary manifold for a customers road race RX8. 321 schedule material is always a pleasure to weld...
07/14/2024

Dustin whipped up this rotary manifold for a customers road race RX8. 321 schedule material is always a pleasure to weld.

Had this beautiful twin turbo C1 corvette in for a custom front mount and new charge piping, along with a burndown tank....
07/10/2024

Had this beautiful twin turbo C1 corvette in for a custom front mount and new charge piping, along with a burndown tank.

This was a bit of a battle, needing 1600+hp worth of front mount in a very tight space was not a walk in the park, but as always, turned out slick! Ready to see the customer send this street car into the 4’s!

Out with the IRS, and in with our small tire ladder link kit. We love doing these conversions on the newer cars. We have...
07/10/2024

Out with the IRS, and in with our small tire ladder link kit. We love doing these conversions on the newer cars. We have done several 5th/6th gen Camaros, G8, SS, and c5, c6, and c7 corvettes, 4 link, torque arm or ladder bar, we got you covered!

The twin turbo falcon is in the wiring and plumbing stage. Got to roll this thing out for some sun, we are extremely exc...
07/10/2024

The twin turbo falcon is in the wiring and plumbing stage. Got to roll this thing out for some sun, we are extremely excited to do some no preppin!

I suppose following the celebration of our independence, I will officially introduce y’all to “Tin Man” Ryan and I had a...
07/07/2024

I suppose following the celebration of our independence, I will officially introduce y’all to “Tin Man”

Ryan and I had a vision, and we are really starting to see what this thing is gonna be, and the intoxicating need to hear it gets worse and worse, but we are getting closer and closer to that day. Ready to race with the boys in ASAG next year!

Can’t thank all the awesome companies that have supplied us with the best parts to put this thing together
Forcedinductions.com
Hammer Concepts and Designs
Tin Soldier Racecars
CJ Race Cars
Race Part Solutions
Rob Sitton @ WASP Fabrication
Andrew Richards Performance Components
Baron Racing
TBM Brakes
Motion Raceworks
Tim McAmis Performance Parts
Ticon Industries
Turbosmart
Quick Performance
Afterworks
Strange Engineering
Mac Fab Beadlocks

Belly pans headin out the door!
07/06/2024

Belly pans headin out the door!

Burndown tank and dual chute mount on this bad ass street car
07/06/2024

Burndown tank and dual chute mount on this bad ass street car

G body single turbo kit we spiced up a little while back, along with some other additions.
07/06/2024

G body single turbo kit we spiced up a little while back, along with some other additions.

05/31/2024

Past few days have been a little rough here, we had a massive storm come tearing through our area, tornadoes, hail, and crazy winds have left us without power for what is now going on 4 days. We were told we’d have power back yesterday, but that never happened.

Please be patient with us during this time, luckily we are all safe, and the shop didn’t get torn up too bad, so we are just patiently waiting to get our power back so we can get back to work.

For our online orders that were pending shipments, our roads were not passable for a couple days but everything had been cleaned up and UPS has our route back on line, we will be shipping out orders Friday.

Again, thank you all so much for your patience with us, and we are extremely sorry for the major delays. If you have any questions, please feel free to get a hold of us! We hope to be back in full swing tomorrow as they have given us a new update on getting our electricity back Friday.

TX2K repair #1 of the week Sure glad I don’t fit in these or I’d reeaaaaally want one
03/13/2024

TX2K repair #1 of the week

Sure glad I don’t fit in these or I’d reeaaaaally want one

Fresh burn down tank install finished up
02/11/2024

Fresh burn down tank install finished up

Address

12722 County Road 217
Forney, TX
75126

Opening Hours

Monday 10am - 7pm
Tuesday 10am - 7pm
Wednesday 10am - 7pm
Thursday 10am - 7pm
Friday 10am - 7pm

Telephone

+19723571660

Website

Alerts

Be the first to know and let us send you an email when PTSFab posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to PTSFab:

Videos

After a few small changes to the program, we took Roxanne out for some marginal prep testing. After being down for several months from a failed lifter, we are back in action! Pretty saucy short track for trying to slow it way down to get down this surface, very happy with the performance!

Well the new Late Model Engines iron based 427 did not disappoint! Topped with none other than the best CT Porting CIDHeads - Competition Induction Designs cylinder heads, pumping the Precision Turbo & Engine 88mm, this unit laid down just shy of 1600 on 20lbs of boost. Derrick has this thing rippin! Time to load er up and head to Texas Motorplex and see if we can get our 7 second pass!

Dandy Racing engines had our Barra engine on the Dyno before they shipped it across the pond to us. Listen to this unit turn 9000rpm through that Precision promod 102mm! Any guesses on HP??

Ready to get back to the track with this hot rod….

The new 4” exhaust on Cameron’s Escalade sounds burly! Yes, those are beadlocks on all 4 corners 😎

Late Model Engines is nearing completion on the new 6.6 iron based 427 topped with CT Porting CIDHeads - Competition Induction Designs cylinder heads! Extremely excited to get the ZL1 back up and running and out to the track to hunt for our 7 second pass. Here’s the old 416 eating up 29lbs from the Precision Turbo & Engine Gen 1 88mm laying down 1587whp on the hubs……

One of our single turbo kits got tuned up by Justin White out east, laying down 1007whp on 18lbs!!

Our good customer Lencho finally got his twin turbo fox body we built last year put to the track. Never driven a car of this caliber, leaving off idle on only 11psi total boost he’s deep in the 9’s at almost 150mph at 8500ft altitude! Just like a walk in the park. Sooooo much more left in it. Expect to see this car running low 8’s once he figures it all out

New charger for our good customers Fox we recently built. The old s480 called it quits at 800whp. Forcedinductions.com set us up with an 88/100 s400. Same boost resulted in 988whp!!!

Our good customer Travis got the mustang back alive and making some hits on the Dyno. PTSFab Turbo kit is working good!

Nothing puts a smile on my face more than seeing our customers enjoying their hot rods! Our base C7 single turbo kit powering this 100% unopened A8 stingray to a 10.9x @ 130mph like just another day at work. Only 7 lbs of boost leaving off idle, 1.8xx 60’ More power on the hit and this thing will be deep in the 10’s on pump gas only!

One of our C7 kits over in Qatar laying down an easy 900whp

Shortcuts

Share

Category