What are the opening hours?

Monday 8am - 6pm Tuesday 8am - 6pm Wednesday 8am - 6pm Thursday 8am - 6pm Friday 8am - 6pm Saturday 8am - 12am

https://www.facebook.com/549818788760328/

All Gen Engines

Home
Australia
Melbourne, VIC
All Gen Engines

Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from All Gen Engines, Automotive, aircraft & boat, Melbourne.

Located in Croydon Victoria 🇦🇺

Specializing in LS engine builds basic to blown.

-Performance or standard engine parts
-On-site cam bearings installation
-GM LS series Reluctor wheel swapping
-Royal precision lubricants stockist

08/02/2025

We recently completed a full overhaul on Andrew Smith’s 6 litre for His VE ss race Ute and gaining roughly 100hp since previous rebuild 👍🏻

- 4.000 stroke Callies crankshaft
- Compstar h beam conrods
- Dome top CP bullet pistons
- Full head overhaul (Blackwell Race Engines)
- New camshaft (opting to reduce the camshaft slightly compared to previous top end package)
Aswell as plenty extras!
👊🏻 🔥
Big thanks to Danko @ Addicted performance for the tune up.
Ending up with 702hp/540ft lbs before 7500rpm on e85 👍🏻

11/11/2024

Awaiting engine dyno this week🔥🔥

-Road dart 427 ci LS

-Race 403 ci LS

Results and build breakdowns coming soon 👌🏼

10/11/2024

We recently rebuilt Shannon Adamson’s factory HARROP 355 stroker for his VR GTS 🔥

Upon disassembly it looked to need a few things corrected from its past engine build which had resulted in a pretty savage head gasket blow out (as shown in photos)

-Acid cleaned all components ✔️
-Fit sleeve and plate hone to next oversize✔️
-CNC port cylinder heads(Pro-Port CNC) ✔️
-Machine block faces ✔️
-Reco Cylinder heads (Blackwells) ✔️
-Resize rods with arp bolts✔️
-Balance full rotating assembly✔️
-Align hone mains with arp bolts✔️
-Convert Rear main and crank to suit neo seal ✔️
-Crow Cams Australia Pty Ltd HYD roller camshaft ✔️
-Yella Terra SD roller rockers✔️

Are some of the upgrades/components we used to undertake this job, All in all was an absolute pleasure to be apart of this engine build.
This car is a credit to its owner the condition of it is A1!

#355 🔥

30/09/2024

388 Dart blocked LSA replacement 🔥

We recently completed this short engine for Stout Automotive in there customers VF maloo.

Using a Dart Machinery LSnext 4.125 block , LSA crankshaft with Mahle Motorsport pistons and Callies compstar rods this combo went together beautifully.

Paired with a pair of reco’d Blackwells cylinder heads and a Crow Cams Australia Pty Ltd camshaft, this was the perfect pump fuel package
👌🏼👊🏼

20/07/2024

427ci LSX ready to be disassemble and overhauled 🔥👊🏼

19/06/2024

Couple of new sets of rods in the checkout process 🔥

- x2 dart 388ci combos
- 403ci aspo combo

👌🏼🏁

11/05/2024

Ash Horton’s new methanol carb 388 LS dart combo for Traded - Burnout Ute🔥🔥

-Dart Machinery block and PRO 1 heads
-Callies compstar crank and rods
-Wiseco pistons
-Crow Cams Australia Pty Ltd camshaft
-Johnson S/T lifters
-ASR pro burnout oil pan

Hopefully soon to have this one machined, built and engine dyno’d with its first comp to be Summernats - Street Machine

More progress photos to come soon.

30/04/2024

Aiden Leist 6.0 370ci L98 🔥

Recently we had the pleasure of freshening up an engine we built 8-9 years ago, this engine has done a combined total of around 60-65 skids in total between my own skid car and Aidens JOYRDE Vk.

Was also a great experience after being together for a while running on methanol and doing between 7600-7800rpm most skids with a wet sump.

In this freshen up we carried out the following ✅

-Racecoatings piston skirt coating
-Plate hone bores to new clearance
-Deck block to clean up
-Blackwell Race Engines reco heads
-Timing chain, Bearings, Rings & CHE trunnion kit

All back assembled and back in his car making 354rwkw on Stout Automotive dyno and ready for street duties 👊🏼

Not bad at all for an engine that still has an unported head!

**Dyno video in comments**

23/03/2024

Nathan Hudson’s 365ci LY6 🔥

-2300 magnuson supercharger
-GM LY6 cast block
-Steel K1 crankshaft
-K1 conrods
-JE forged pistons
-Mid 260’s boost friendly camshaft
-Blackwell Race Engines CNC S/P heads
-ARP hardware throughout

Beautiful car and great engine combo to make decent reliable power 🏁

Enjoy mate 👍🏼

22/09/2023

Been along time between posts 😅

Couple bottom ends to sort out this week..

-Blown 365ci LY6 road engine for Stout Automotive

-Blown 416ci Dart block combo for JJ Performance

-MRCHOW’s new spicy forged 6.0 bottom end Justin Mckinnis 🙏🏼

Keep a eye out more updates coming soon👌🏼

15/04/2023

Job we completed this week. 🔥 🔥

-Camshaft upgrade removing the VCM 9 and replacing with high 230’s mid 250’s
-Degree cam and check piston to valve clearance
-Check pushrod pre-load
-Supply and fit trunnion kit
-Clean and fit intake manifold

Ready to go 👌🏼 👍🏼

15/03/2023

Fresh cam kit and supporting mods for the LS powered CRABBY Corolla 👌🏼

Enjoy mate Sam Crabbe 👍🏼

14/03/2023

Holden 355 🇦🇺🇦🇺

This combo came to us for a freshen up late last year and is ready to go!

We stripped it back to bare bones, acid cleaned the block and heads upgraded the bottom end too 355 cube with

-S**t stroker crank.
-Machined block and crank to suit neo rear seal.
-H beam s**t conrods with arp 2000 bolts.
-JE bowl top pistons to achieve effective comp ratio.

Switched out the old flat tappet style camshaft for a retro fit Lunati Power .600 lift hydraulic roller camshaft with a set of reco’d and hand ported VN heads and match ported single plane torque power EFI manifold.🔥

Tied together with this gorgeous HV ASR oil pan👌🏼👌🏼

Absolute pleasure building these old iron lions!
Enjoy Stout Automotive✌🏼

23/12/2022

2022 all wrapped up ✅

We would like to wish all our customers/friends a very merry Christmas and a happy new year.🎄🎇
It’s been a pleasure being involved in all builds throughout the year👌🏼

Big thankyou to Stout Automotive & JJ Performance for the continued work flow through the year, the way you run your ship is A1!

Hope everyone has a great holiday period and we will be returning on the 23rd of Jan 👍🏼👍🏼(will still be open throughout the holiday period for engine parts/accessories contact via messenger)

19/11/2022

Couple of LS’s on the go before Christmas 🔥👌🏼

We will be closed from the 24th-28th of November as we are attending Springnats 2022

👌🏼🍻

16/09/2022

Quick top end freshen up on Nathan’s LS powered s-13 drift car 🔥

-Blackwell Race Engines CNC ported/reco heads✅
-Dual valve spring kit✅
-Fresh set of Trunnions✅
-LS2 manifold✅
-92mm Holley EFI throttle ✅

Enjoy mate 🙌🏼

Address

Melbourne, VIC
CROYDON

Opening Hours

Monday	8am - 6pm
Tuesday	8am - 6pm
Wednesday	8am - 6pm
Thursday	8am - 6pm
Friday	8am - 6pm
Saturday	8am - 12am

Website

facebook.com

Alerts

Be the first to know and let us send you an email when All Gen Engines posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to All Gen Engines:

Videos

Here’s a video of Khye Skoda car with its new LS1 we built recently and tuned by Stout Automotive👊🏼 Good fun trying a few different new combos with camshaft and compression and getting some good results 315rwkw from a LS1 with a 241 head! #Allgenbuilt #Stouttuned #SKODAA 🔥 🔥

Happy days Dean Cruddas🔥 SENDIT all tuned, run and done! Ready for testing this weekend with the new combo ☝️ #STOUTTUNE #ALLGEN

Nothing better then the sound of a LS fed by boost 🛫✅#800killawasps #Needsmoreturbo