TRL Industries

22/08/2024

Another batch of EF/EL smoothed and painted Cupholders going out today, if you haven't got one yet jump on it! Our favourite product by far for all series EF/EL's
https://www.trlindustries.com.au/ford

16/07/2024

Our range of ford parts has grown significantly since taking this photo! Check out our stock through the link below
www.TRLindustries.com.au

18/05/2024

Are you sick of the useless cup holders that come standard in your pride and joy? Look no further, Our new cupholders directly replace your original cup holders and clip in the same way. No modifications required and they install in seconds. Make your daily or weekender experience in your holden that little but more comfortable today!
https://www.trlindustries.com.au/product-page/holden-vt-vx-cup-holders

18/05/2024

🟥New Product!🟥

We've now released our double din headunit bezel's for EF/EL & NF/NL Falcon, Fairmont and Fairlane's which fills the gap between your aftermarket headunit and the factory Ford double din surrounds, bringing a nice completed look to your interior. Check them out now!
https://www.trlindustries.com.au/product-page/ef-el-falcon-fairmont-fairlane-double-din-surround

09/05/2024

Grab your reproduction speaker grills while stocks last!
https://www.trlindustries.com.au/product-page/ef-el-speaker-grills

12/04/2024

🟥 CUSTOM PARTS 🟥
Hi guys, we get a lot of messages asking if we can do one off parts for your builds and the answer is Yes!

If you want to take your build to the next level and get perfect fitting custom parts to suit your needs send us a message. Shown here is Dominic's hand made switch surround (right) next to our switch surround (left) custom made to hold his window switches and a haltech keypad in his EL Fairmont with a Barra/powerglide using a can keypad through the Haltech Elite 2500

07/04/2024

🟥New Arrival!🟥

Dual gauge holders for EF-EL NF/NL Falcon, Fairmont and Fairlane's. Our holders slot in directly behind the shifter for a clean oem gauge display, and is perfect for Boosted or N/A cars especially to replace the unreliable factory water temp & oil pressure https://www.trlindustries.com.au/product-page/ef-el-falcon-fairmont-dual-gauge-holder

30/03/2024

🟥 New Arrival! 🟥

Now available are our boost gauge holders that replaces the clock or trip computer in your EF/EL Falcons/Fairmonts. Suits 52mm gauges with no need to modify your dash. Coming soon are dual gauge holders for under the ash tray along with A-pillar holders.
https://www.trlindustries.com.au/product-page/ef-el-falcon-fairmont-clock-gauge-holder

09/03/2024

🟥New Release!🟥

It's finally time for us to release our all new bolt in Cup Holder solution for the EF/EL Falcon, Fairmont and Fairlane's! These new cupholders have been designed to hold all sorts of cup sizes from skinny monster cans to large Macca's cups thanks to the new removable inserts. We're also now offering smoothed and painted versions which we colour matched to the original cup holders for that OEM look, while also offer unpainted 3D printed versions for those on a budget. Check them out through the links below!

Fairmont/Fairlane:
https://www.trlindustries.com.au/product-page/ford-ef-el-fairmont-fairlane-cup-holders
Falcon:
https://www.trlindustries.com.au/product-page/ford-ef-el-falcon-cup-holders

06/03/2024

🟥 Toyota Soarer/Lexus SC cupholder now available 🟥

We are proud to release the only double cupholder and rear passenger cupholder options in the market for the Toyota Soarer/Lexus SC platform.

This product replaces the seldom used and often forgotten about rear ashtray, with an ergonomic cupholder that hides neatly out of view, preserving the centre console's originality and retaining the stock cupholders. Giving you a maximum of four cupholders for you and your passengers to enjoy.

Our product includes removable inserts to accommodate water bottles, small and large cans and takeaway cups, which are often too large for the stock cupholders. This kit includes clips which utilise the original ashtray mounts for a secure oem like fit.

Order yours now, below.
https://www.trlindustries.com.au/toyota

01/03/2024

🟥PRE ORDERS GET IN FIRST🟥

Finally the time has come to release our reproduction EF/EL + NF/NL Speaker Grills. After lots of time perfecting the design and getting them almost identical to OEM by making them from heat and UV resistant resin, as well as perfecting the surface finish and paint matching them to genuine grey and cappuccino grills, we're finally ready to release them.
https://www.trlindustries.com.au/product-page/ef-el-speaker-grills

12/02/2024

🟥New releases 🟥
Introducing our latest parts platform, the Toyota Soarer and Lexus SC300/400.
After receiving overwhelming support for our own personal Soarer projects and several parts requests, we're excited to add the following items to our line-up.

🟥Series 3: Bumper exhaust cut out blanks (currently available)
- To suit cars with aftermarket single exit exhausts.
- Available as left or right sides.
- Available in black or white.
- Series 1-2 Blanks to be released shortly.

🟥Rear ashtray cupholders
(Releasing later this week)
- Fit in place of the rear ashtray
- Designed to fit multiple drink sizes
- Available in styles to fit one or two drinks.

🟥Oem reverse sensor covers (Prototype stage. Updates to come)
- Designed to replace the often missing or broken optional extra reverse sensor covers.

Available now
https://www.trlindustries.com.au/toyota

11/02/2024

🟥Now Available🟥
EF-EL XR6/8 Headlight Frames and Glare Guards

https://www.trlindustries.com.au/product-page/ef-el-headlight-frames

08/02/2024

Sneak peek of the EF/EL Cup holders coming out very soon in 4 switch, 2 switch and no switch variants. Shown with the removable inserts for, 600ml bottle, mini monster style cans and standard cans, you can then remove the clip in inserts to fit bigger cups such as large Maccas cups.

03/02/2024

EF/EL Cup holders moving steadily along in the prototype phase, we never thought we'd run into the issue of having too big of a cup holder, it's a good problem to have with the space limitations from the switches and we can now dial back the hole sizes to better hold the drinks. What sort of drinks are you guys wanting to put in these new cup holders?

29/01/2024

Hi everyone, we just wanted to put out an update on the progress for each of the new E-series parts coming out soon. We've finished the speaker grills and are now just working on the paint matching, so stay tuned for those. EF/EL XR Headlight frames are 99% done we're just improving the surface finish on them. EF/EL Non body kit towbar covers are also at 99% completion. And finally the EF/EL Cup holders are moving along in the design phase.

20/01/2024

🟥New release 🟥
Fog-light bezels to suit the VT Calais and SS fog-light front.

These are designed as a direct replacement for the original oem bezels, which are becoming increasingly difficult to find in good condition. Along with being only available on limited models, the ageing original clips are prone to breaking, causing the bezels to fall off.

Using 3D scanning technology we've reverse engineered the original design to ensure our product has an oem like fit. On top of that we've reinforced the original clips in our design and made them compatible with the original screws, or with our supplied bolts and nyloc nuts, ensuring a more secure fit than oem!

Available now
https://www.trlindustries.com.au/product-page/vt-ss-calais-fog-light-bezels

20/01/2024

Some cool stuff going on today at TRL Industries! 3D scanning of the EL interior, first task is get the centre console and trans tunnel in 3D space to make the best fitting cup holders possible, next job is a secret can you guess what we're making? Turbo related 🐌

17/01/2024

🟥 NEW ARRIVAL 🟥

EA-ED Falcon/Fairmont Towbar Covers now available through the link below -

https://www.trlindustries.com.au/product-page/ea-ed-falcon-fairmont-tow-bar-cover

17/01/2024

Final Prorotype of the EF/EL XR Headlight Frames is completed which means they'll be listed shortly! Stay tuned for a release post.

15/01/2024

Another cool E-series update! The first prototype of the window switch is being test fitted which means we can go straight into developing the new cup holders! Also shown are the EF/EL XR Headlight Glare Guards which also fit perfect first try, which will be a common theme for us this year!

14/01/2024

Starting off 2024 with a bang! Coming very soon for the E-Series falcons will be:

EF/EL XR Headlight Frames
EF/EL Door Speaker Grills
EF/EL Dash Clock Gauge Holders
EA-ED Towbar Covers
And an Entirely new EF/EL Cup holder solution!
Stay Tuned for more updates!

13/12/2023

With our Ford catalogue of cup holders and reproduction parts growing quicker than ever, here's the range squeezed into one pic! Make sure to take advantage of our 20% off sale store wide, ending December 29! www.trlindustries.com.au

09/12/2023

🟥Now Available🟥
E-Series Manual shift k**b bases which are identical to OEM!
Available through this link - https://www.trlindustries.com.au/product-page/e-series-manual-shift-k**b-base

08/12/2023

Another sneak peak for the E-Series Speaker grills before paint! Both the grey and cappa interiors have been colour matched, we're still currently working on a fix for the drivers side grill design. Stay tuned!

06/12/2023

Grab a gift for yourself or a loved one today with 20% off storewide! https://www.trlindustries.com.au/

11/11/2023

🟥Product Update!🟥
For all the E-Series fans waiting patiently for replacement speaker grills, we appreciate it! I'm more than happy with the production method we chose for the speaker grills but we've run into a slight hiccup where the drivers side grills aren't actually a mirrored version of the passenger side like we originally thought. They're actually a slightly different shape, so they're being 3D scanned and reverse engineered as you read this. Once that's done I'll give them a test fit, finish the colour matching for grey and cappa interiors and then release them to you guys!

11/11/2023

Our final batch ever of Honda QR50 Kickstart shafts just arrived. We won't be making these again so get in while stocks last through the link below, only 15 available!

https://www.trlindustries.com.au/product-page/honda-qr50-kickstart-shafts

12/10/2023

Hmm what do we have here E-series fans?

04/10/2023

🟥New Release🟥

1978-1981 Suzuki RM50/60 Style airbox assemblies and covers now available through this link -

Gone are the days where you're unable to find the right part for your rider/resto. Introducing ourTRL Industries reproduction Airbox Assemblies made to fit the following bikes:1978-1981 RM501979-1981 RM60